제품상세정보

TYPICAL APPLICATIONS:

Accelerator Pedal Sensor for electronic throttle control systems

Features/Benefits:

Input voltage: 5/8/12/24/48/72Vdc as requested

Output: Analogue ( Single, Dual ) PWM ( Single , Dual ), CAN Bus as per SAE J-1939

Switch: Single, Double(Electronic Switch)

Weight: 140g

Connector: Adjustable as per customer specification.

Option: AMP J-Series. Delphi, Deutsch, Packard weather-seal or as requested.

Rotating magnetic/ fixed sensor configuration provides improved accuracy and reliability.

Fully programmable outputs : offset, gain, slope and temperature conversation

Sintered magnetic provides excellent temperature stability and corrosion resistance.

Internal preload return spring & Internal magnetic screening plate

TYPICAL SPECIFICATIONS

Electronics

Seal Integrity: IP67

ESD: Tested in accordance with IEC 61000-4-2

EMS: As per ISO 11452-2

Input Voltage : 5 / 8 / 12 / 24 / 48 /72Vdc as requested

Signal and Switches: Signal type and switch position to be in accordance with customer specification.

Mechanical

Sensor Mechanical Travel: 156deg, 185deg

Rotor rotating Force: Min 0.4kgf / Max 1.3kgf

Adjustable as per customer specification.

End-Break: min 5Nm

Sensor return to idle after soaking at

–40℃ for 12Hours : below 0.5sec

+50℃ for 12Hours : below 0.5sec

Environment

Operation Temp.: -40 ~ +85

Storage Temp.: -40 ~ +105

Vibration Test: Subject to broadband random vibration between 20 and 2000Hz for hours in all 3 axis.

Shock Test: After exposed to Acceleration 20G for 11ms

Impact : Free drop onto a smooth concrete floor from a height of on meter, a total of 6 times.

High Voltage Test

APS signal : After Exposed to 12Volts for 3min

IVS signal : After Exposed to 38Volts for 3min

Temp Test : After Exposed to - 40 ℃ ~ +85 ℃ (100cycles)

Humidity Test : After Exposed to – 32 ℃ ~ +70 ℃ (96%)

Salt Fog : After exposed to salt for 96hours (JIS Z2371)

Chemical Test : Exposed to 3 second dipping in each of the test fluids, followed by a 3 minutes air dry