HOME PRODUCTS SENSORS
SENSORS
SENSORS

  • 158 SENSOR

    간략설명

    Non-contact sensor 158

제품상세정보

TYPICAL APPLICATIONS: 

Accelerator Pedal Sensor for electronic throttle control systems


Features/Benefits:

Input voltage: 5, 8, 12, 24, 48, 72Vdc as requested

Output: Analogue(Single, Dual) PWM(Single, Dual), CAN Bus as per SAE J-1939

Switch: Single, Double(Electronic Switch)

Weight: 50g

Connector: MQS Sealed connector AMP 1-967587-3 Compatible connector

Rotating magnetic/ fixed sensor configuration provides improved accuracy and reliability.

Fully programmable outputs : offset, gain, slope and temperature conversation

Sintered magnetic provides excellent temperature stability and corrosion resistance.

Internal preload return spring

Internal magnetic screening plate

 


TYPICAL SPECIFICATIONS

Electronics

Seal Integrity: IP67

ESD: Tested in accordance with IEC61000-4-2

EMS: As per ISO11452-2

Input Voltage : 5, 8, 12,24, 48, 72Vdc as requested

Signal and Switches: Signal type and switch position to be in accordance with customer specification.

 

Mechanical

Sensor Mechanical Travel: 90+/- 2deg

Rotor rotating Force: min 0.5kgf / Max 1.0kgf

Sensor return to idle after soaking at

–40℃ for 12Hours : below 0.5sec

+50℃ for 12Hours : below 0.5sec

 

Environment

Operation Temp.: -40 ~ +85

Storage Temp.: -40 ~ +105

Vibration Test: Subject to broadband random vibration between 20 and 2000Hz for hours in all 3 axis.

Shock Test: After exposed to Acceleration 20G for 11ms

Impact : Free drop onto a smooth concrete floor from a height of on meter, a total of 6 times.

High Voltage Test

APS signal : After Exposed to 12Volts for 3min

IVS signal : After Exposed to 38Volts for 3min

Temp Test : After Exposed to - 40 ℃ ~ +85 ℃ (100cycles)

Humidity Test : After Exposed to – 32 ℃ ~ +70 ℃ (96%)

Salt Fog : After exposed to salt for 96hours (JIS Z2371)

Chemical Test : Exposed to 3 second dipping in each of the test fluids, followed by a 3 minutes air dry

Life: - 10 M Cycle at Full Travel